Description
This Cisco CCNA Interconnecting Cisco Networking Devices Part 2 (ICND2) Training is the exam associated with the Cisco Certified Network Associate certification. This course will prepare you for this exam. This exam stands to test your knowledge and skills required to successfully install, operate, and troubleshoot a small branch office network. The exam covers topics on extending switched networks with VLANs; VLSM and IPv6 addressing; the VTP, RSTP, OSPF and EIGRP protocols; determining IP routes; configuring, verifying and troubleshooting VLANs; managing IP traffic with access lists; NAT and DHCP; establishing point-to-point connections and establishing Frame Relay connections. This course is designed for Entry-level Network Engineer, Network Administrator, Network Support Technician, Help Desk Technician, or who are seeking the Cisco CCNA Routing and Switching certification. So, if you are one of them you are welcome to this course.
Assessment & Certification
To achieve a formal qualification, you are required to book an official exam separately with the relevant awarding bodies. However, you will be able to order a course completion CPD Certificate by paying an additional fee.
- Hardcopy Certificate by post – £19
- Soft copy PDF via email – £10
Requirements
Our Cisco CCNA Interconnecting Cisco Networking Devices Part 2 (ICND2) Training is fully compatible with any kind of device. Whether you are using Windows computer, Mac, smartphones or tablets, you will get the same experience while learning. Besides that, you will be able to access the course with any kind of internet connection from anywhere at any time without any kind of limitation.
Career Path
After completing this course you will be able to build up accurate knowledge and skills with proper confidence to enrich yourself and brighten up your career in the relevant job market.
Course Curriculum
| Implementing Scalable Medium-Sized Networks | |||
| Troubleshooting VLAN Connectivity | 00:25:00 | ||
| Building Redundant Switched Topologies | 00:40:00 | ||
| Improving Redundant Switched Topologies with EtherChan | 00:17:00 | ||
| Understanding Layer 3 Redundancy | 00:50:00 | ||
| Initial Lab Setup – Part 1 | 00:17:00 | ||
| Initial Lab Setup – Part 2 | 00:14:00 | ||
| Optimizing STP | 00:15:00 | ||
| PortFast and BPDU Guard | 00:04:00 | ||
| Configuring EtherChannel | 00:11:00 | ||
| VTP | 00:13:00 | ||
| HSRP | 00:18:00 | ||
| QoS | 00:11:00 | ||
| Troubleshooting Basic Connectivity | |||
| Troubleshooting IPv4 Network Connectivity | 00:41:00 | ||
| Troubleshooting IPv6 Network Connectivity | 00:20:00 | ||
| Troubleshooting an ACL | 00:15:00 | ||
| Implementing an EIGRP-Based Solution | |||
| Implementing EIGRP | 00:34:00 | ||
| Troubleshooting EIGRP | 00:13:00 | ||
| Implementing EIGRP for IPv6 | 00:09:00 | ||
| EIGRP | 00:12:00 | ||
| Troubleshooting EIGRP | 00:06:00 | ||
| Routing Table Issues | 00:04:00 | ||
| EIGRP with IPv6 | 00:14:00 | ||
| Implementing a Scalable, Multiarea Network, OSPF-Based Solution | |||
| OSPF Overview | 00:32:00 | ||
| Multiarea OSPF Implementation | 00:12:00 | ||
| Troubleshooting Multiarea OSPF | 00:20:00 | ||
| Examining OSPFv3 | 00:09:00 | ||
| Multiarea OSPF | 00:28:00 | ||
| Troubleshooting OSPF | 00:17:00 | ||
| Configuring OSPF for IPv6 | 00:23:00 | ||
| Wide-Area Networks | |||
| Understanding WAN Technologies | 00:22:00 | ||
| Configuring Serial Encapsulation | 00:34:00 | ||
| Establishing a WAN Connection Using Frame Relay | 00:36:00 | ||
| Introducing VPN Solutions | 00:14:00 | ||
| Configuring GRE Tunnels | 00:09:00 | ||
| Enabling HDLC | 00:13:00 | ||
| Troubleshooting | 00:08:00 | ||
| Frame Relay | 00:28:00 | ||
| External BGP | 00:13:00 | ||
| GRE Tunnel | 00:18:00 | ||
| Dialer Interface | 00:12:00 | ||
| Network Device Management | |||
| Configuring Network Devices to Support Network | 00:25:00 | ||
| Managing Cisco Devices | 00:41:00 | ||
| ICND Part 2 Licensing | 00:24:00 | ||
| Managing Files | 00:06:00 | ||
| Logging | 00:07:00 | ||
| Syslog | 00:09:00 | ||
| Password Recovery | 00:10:00 | ||
| Superlab Initial Setup | 00:04:00 | ||
| Superlab – Part 1 | 00:18:00 | ||
| Superlab – Part 2 | 00:15:00 | ||
| Superlab – Part 3 | 00:19:00 | ||
| Superlab – Part 4 | 00:08:00 | ||
| Superlab – Part 5 | 00:17:00 | ||
| Superlab – Part 6 | 00:17:00 | ||
| Superlab – Part 7 | 00:16:00 | ||
| Superlab – Part 8 | 00:13:00 | ||
| Superlab – Part 9 | 00:03:00 | ||
| Mock Exam | |||
| Mock Exam- Cisco CCNA Interconnecting Cisco Networking Devices Part 2 (ICND2) Training | 00:20:00 | ||
| Final Exam | |||
| Final Exam- Cisco CCNA Interconnecting Cisco Networking Devices Part 2 (ICND2) Training | 00:20:00 | ||
Certificate of Achievement
CPD Accredited Certification
Certification is available –
- In PDF for £2.99
- Hard copy for £8.99
Course Reviews
No Reviews found for this course.
- PRIVATE
- 1 year
- Advanced
- Number of Units57
- Number of Quizzes2
- 17 hours, 23 minutes