Unit 01: Part Modeling Advanced Techniques- Part 1 | |||
1.1 Extruded Boss Advanced | 00:03:00 | ||
1.2 Extruded Boss Additional | 00:04:00 | ||
1.3 Extruded Cut Advanced | 00:03:00 | ||
1.4 Swept Boss | 00:02:00 | ||
1.5 Lofted Boss | 00:03:00 | ||
1.6 Draft | 00:03:00 | ||
1.7 Shell | 00:02:00 | ||
1.8 Rib | 00:04:00 | ||
1.9 Example #1 | 00:08:00 | ||
1.10 Example #2 | 00:07:00 | ||
Unit 02: Part modeling advanced techniques- Part 2 | |||
2.1 Linked dimensions | 00:04:00 | ||
2.2 Equations | 00:05:00 | ||
2.3 Coordinate System | 00:03:00 | ||
2.4 Hole wizard | 00:03:00 | ||
2.5 Feature scope | 00:02:00 | ||
2.6 Mirror | 00:03:00 | ||
2.7 Example #1 | 00:09:00 | ||
2.8 Example #2 | 00:09:00 | ||
Unit 03: Design Table and Configurations | |||
3.1 Creating a Design Table | 00:06:00 | ||
3.2 Configurations | 00:05:00 | ||
3.3 Example #1 | 00:07:00 | ||
3.4 Example #2 | 00:04:00 | ||
Unit 04: Assembly advanced techniques- Part 1 | |||
4.1 Distance and Angle | 00:04:00 | ||
4.2 Profile Center | 00:04:00 | ||
4.3 Symmetric and Width | 00:05:00 | ||
4.4 Path Mate | 00:05:00 | ||
4.5 Linear Coupler | 00:06:00 | ||
4.6 Example #1 | 00:08:00 | ||
4.7 Example #2 | 00:13:00 | ||
Unit 05: Assembly advanced techniques- Part 2 | |||
5.1 Collision Detection | 00:02:00 | ||
5.2 Interference Detection | 00:03:00 | ||
5.3 Assembly Feature | 00:02:00 | ||
5.4 Replacing Part | 00:01:00 | ||
5.5 Sub-assembly | 00:03:00 | ||
5.6 Example #1 | 00:05:00 | ||
5.7 Example #2 | 00:05:00 | ||
Assignment | |||
Assignment – Intermediate Solidworks Course | 00:00:00 |
No Reviews found for this course.